Skip to content
After turning off wiping I set it to 1mm as 0.8 just didn't seem to kill all the fuzzies.
1. The results can be seen below. Wir beginnen mit dem ersten Reiter, dem “Extruder”. Get it 3d printed All3DP is an editorially independent publication. Thanks!PETG does have a tendency to string worse than PLA, but it's benefits far out weigh it's issues.Not sure if you know but S3D has a wonderful printing trouble shoot guide: If you're experiencing oozing, you can adjust a number of things:Take a look at the guide, and then do some tests by adjusting those mentioned areas. I tuned my Simplify 3D profile for PETG, on the Creality CR-10S PRO. Discussion. These print defects typically occur at the beginning or end of each segment, where the extruder has to suddenly start or stop extruding plastic. The strength version doesn't use the part fan except for overhands. Beim stöbern in meinem Profil-Ordner habe ich dazu eigentlich keine Abweichungen gefunden.
Wed Jul 01, 2015 6:24 pm . So, I thought maybe being able to take a look at my profile could be useful. It can also be found on numerous Facebook & Usenet groups, but I didn't see in Thingiverse, so now it is. There are several ways to eliminate these print defects such as enabling “Extra Restart Distance” or “Coasting” options located in the Extruder tab. I just bought a 3d printer and a friend of mine "gave" me simplify3d. 100% Upvoted.
Edit: Added a link that won't expire in 2 months. But you "edit process settings" and then "Auto-Configure for Material" drop down, choose PETG. Hey Guys, I been printing with PETG for about 20 hours now and gotta say that I love it. Close.
I just bought a 3d printer and a friend of mine "gave" me simplify3d.
10 posts • Page 1 of 1. jheikkila54 Posts: 18 Joined: Wed Jun 24, 2015 12:44 pm. Instead of wiping I plan on trying the negative restart distance like Tailslide has posted. Attached is my simplify 3d profile that I've been using.
I've been doing well at 1mm without wiping. Due to the fact that I like the software very much I bought it (pfew and it is expensive). Jetzt müssen wir jeden einzelnen Reiter (rote Pfeile) durchgehen. More . Here, we’ll take you through how to successfully print with PETG and help you troubleshoot common issues.
It is very strong/durable, doenst warp, lift, or crack like ABS and isnt as brittle as PLA. I print nearly exclusively with PETG. At any rate, it's a modification of the profile that Josef Prusa originally provided. I do believe it's a little slower than some people might like, but I tried to tune it for strength and quality. PET and PETG filaments are known for their ease of printability, smooth surface finish, and water resistance. I'll message you when I get some results.Depend from producer parameter, try to warm up slow end manualy check the extrusion resistanceyou will need more retraction than PLA. Currently I want to use PETG. Thanks!I've never seen a negative restart distance. Discover the perfect Ender 3 PETG settings with this simple guide. save hide report. Flag. At any rate, it's a modification of the profile that Josef Prusa originally provided. Printing PETG. I'm not entirely sure how I managed to get it tweaked as well, but it's always worked nicely for me. The strength version doesn't use the part fan except for overhands. Currently I want to use PETG. Simplify3d PETG profile. share. Otherwise, you will see bumps on your finish where printing resumes after a move.Check 'ooze control' topic here.. PETG likes to ooze: Oh I know it does.
This means that the strings stay inside of your part where no one can see them, instead of being on the outside of your model. You can download the profile by following this link.